BOSS WL-50 Guitar Wireless System

Description

With the WL-50, it’s never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology, the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. The stompbox-sized receiver fits right alongside your other pedals, and includes a docking port for charging the transmitter and automatically setting the best wireless connection. There’s even a handy DC output, allowing you to distribute power to multiple pedals on your board.

Once you experience the wireless independence provided by the WL-50, you’ll never go back to using a standard cable again! Setup is quick and simple, and you’re able to move about freely while playing at home, jamming with friends, and performing on stage. During sound check at a gig, you can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.

System includes receiver and transmitter.

Features

Plug-and-play wireless system in a stompbox-size format for pedalboards

Optimum wireless connection set automatically, with no complicated setup required

Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 65-foot/20-meter range

Selectable cable tone simulation options: short, long, and bypass

Receiver powered by optional PSA-S adaptor or two AA batteries

With PSA-S adaptor power, the receiver’s DC output can distribute power to one or more pedals using an optional PCS-20A daisy-chain cable

Spare WL-T Transmitter available separately

Accessories

• Owner´s Manual
• Leaflet USING THE UNIT SAFELY
• Transmitter
• Rubber foot x 4
• Alkaline battery (AA, LR6) x 2
• An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T).

Options (sold separately)

• AC adaptor: PSA-S series
• Parallel DC cord: PCS-20A (DC Plug x8)

Specs

Specifications-Receiver

Wireless FormatBOSS proprietary digital audio format

Wireless carrier frequency2.4 GHz

Compatible Channels14 (May vary due to local conditions)

Transmission Range65 feet line-of-sight(May vary due to local conditions)

Latency2.3 ms

Dynamic Range110 dB or greater

Frequency Response20 Hz--20 kHz

Nominal Input Level-10 dBu

Input Impedance1 M ohm

Nominal Output Level-10 dBu

Output Impedance1 k ohm

Recommended Load Impedance10 k ohms or greater

ControlsC
able Tone switch (OFF/SHORT/LONG)

IndicatorsP
ower
Receive

Connectors
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
TRANSMITTER jack: 1/4-inch TRS phone type
DC IN jack
DC OUT jack

Power Supply
Alkaline battery (AA, LR6) x 2
AC adaptor (sold separately)

Current Draw
During wireless operation: 60 mA
While charging transmitter: 320 mA

Expected battery life under continuous use
Alkaline battery (AA, LR6): Approximately 10 hours
* These figures will vary depending on the actual conditions of use
Width

• 
  72 mm
• 2-7/8 inches

Depth
121 mm
4-13/16 inches
Height

• 
  56 mm
• 2-1/4 inches

Weight (including battery)
220 g
8 oz

S

pecifications-Transmitter

• Nominal Input Level

10 dBu (1 M ohm)
Indicator
battery

Connectors
Input plug: 1/4-inch TRS phone type,
DC IN 5 V port: USB Micro-B type

Power Supply
Rechargeable lithium-ion battery
Supplied from the DC IN 5 V port

Current Draw
350mA

Battery charging time
Approximately 3 hours

Expected battery life under continuous use
Approximately 12 hours
* These figures will vary depending on the actual conditions of use.
Width

• 87 mm
• 3-7/16 inches

Depth

• 
  22 mm
• 7/8 inches
• Height
• 36 mm
• 1-7/16 inches
• Weight